Mailing List
Join our mailing list:

A Structural Engineer's Primer for Probabilistic Seismic Hazard Analysis

by Jeffrey Berman, Ph.D.

June 13, 2024; 12:00 NOON - 2:30 PM Pacific Time (Please note the time)

Small Business System Requirements FAQ Register

ICC Preferred Provider #1467
ICC Preferred Provider Course Number: 21739

Receive a 15% discount on any of our products when purchased with a seminar registration.

Seminar Description

Probabilistic seismic hazard analysis (PSHA) is the conceptual framework upon which ground motion intensity (i.e., spectral acceleration) is estimated for use in design throughout the United States. It is also used in site specific determination of ground motion for special projects or projects with poor site conditions. Determination of ground motion parameters is the realm of geotechnical engineers, however, structural engineers should have a working understanding of the underpinnings of PSHA to properly interpret both the design ground motion parameters and their structural analysis results. This seminar will provide a background in PSHA designed for structural engineers to develop an understanding of where critical design ground parameters are derived from.

The views and opinions expressed in this seminar are those of the speaker(s) and do not necessarily reflect those held by S. K. Ghosh Associates LLC.

Speaker Bio

Jeffrey Berman, Ph.D., is the Thomas and Marilyn Neilson Professor in the Department of Civil and Environmental Engineering at the University of Washington. He has two decades of experience in practically focused research on the seismic behavior of steel structures, including concentrically braced frames, eccentrically braces and steel plate shear walls. His research and interactions with practitioners and building code officials has led to several contributions to the AISC Seismic Design Provisions, AISC 341-16. He has authored or co-authored more than 60 journal publications and regularly organizes sessions at major conferences on topics in the seismic behavior of steel structures.

Registration Information

1 Connection 2 Connections 3 Connections 4 Connections 5 Connections > 5 Connections
Early Registration
Discounted Fee*
$260 $460 $585 $640 $725 $130
per connection
Regular Fee $275 $490 $630 $700 $800 $145
per connection
* Registration on or before June 11, 2024

Please note a single registration allows you to have one connection. However, a number of people can view and listen to the seminar using one connection by using an LCD projector (or a large computer monitor) and good computer speakers or a speaker phone.

All attendees, irrespective of the number of registered connections, can earn 0.25 Continuing Education Units (CEUs) or 2.5 professional development hours (PDHs). CEU/PDH certificates are provided free of charge.

Small Business Registration

We provide discounted registration for small businesses. If you are not registered with us as a small business yet, please click below for more information.

Small Business Benefits and Eligibility

FAQ

  • A connection is defined as a single web connection plus a single telephone connection (if necessary). If you want to sign up for more than one connection for this seminar, you will have the opportunity to do so after placing the seminar in your cart.
  • A $15 fee will apply if the seminar registrant wishes to revise the web seminar registration (e.g. switch from one web seminar to another).
  • Refunds are limited to 80 percent of fee and must be applied for in writing WITHIN THIRTY DAYS after the scheduled seminar.
  • We are a registered provider for continuing education in the State of Florida (Provider # 4732), the State of New York (Provider # 99), the State of New Jersey (Provider # 24GP00014200), the State of Maryland, and for the Structural Engineers Certification Board (SECB) of the National Council of Structural Engineers Associations (NCSEA).