Seismic Design of Special Concentrically Braced Frames
by Jeffrey Berman, Ph.D.
June 14, 2023; 11:00 AM - 1:30 PM Pacific TimeSmall Business System Requirements FAQ Register
ICC Preferred Provider Course Number: 19793
The design of ductile concentrically braced frames has evolved considerably over the past few revisions of AISC 341. This seminar will present fundamentals on the seismic behavior of concentrically braced frames and the current AISC 341-16 provisions for Special Concentrically Braced Frames that are intended to achieve ductile seismic response. Specific points of emphasis will include the application of capacity-based design principles, braced frame member design, and braced connection behavior and detailing for ductility. An overview of a design example will also be provided.
Jeffrey Berman, Ph.D., is the Thomas and Marilyn Neilson Professor in the Department of Civil and Environmental Engineering at the University of Washington. He has two decades of experience in practically focused research on the seismic behavior of steel structures, including concentrically braced frames, eccentrically braces and steel plate shear walls. His research and interactions with practitioners and building code officials has led to several contributions to the AISC Seismic Design Provisions, AISC 341-16. He has authored or co-authored more than 60 journal publications and regularly organizes sessions at major conferences on topics in the seismic behavior of steel structures.
|1 Connection||2 Connections||3 Connections||4 Connections||5 Connections||> 5 Connections|
|* Registration on or before June 12, 2023|
Please note a single registration allows you to have one connection. However, a number of people can view and listen to the seminar using one connection by using an LCD projector (or a large computer monitor) and good computer speakers or a speaker phone.
All attendees, irrespective of the number of registered connections, can earn 0.25 Continuing Education Units (CEUs) or 2.5 professional development hours (PDHs). CEU/PDH certificates are provided free of charge.
Small Business Registration
We provide discounted registration for small businesses. If you are not registered with us as a small business yet, please click below for more information.
- A connection is defined as a single web connection plus a single telephone connection (if necessary). If you want to sign up for more than one connection for this seminar, you will have the opportunity to do so after placing the seminar in your cart.
- A $15 fee will apply if the seminar registrant wishes to revise the web seminar registration (e.g. switch from one web seminar to another).
- Refunds are limited to 80 percent of fee and must be applied for in writing WITHIN THIRTY DAYS after the scheduled seminar.
- We are a registered provider for continuing education in the State of Florida (Provider # 4732), the State of New York (Provider # 99), the State of New Jersey (Provider # 24GP00014200), the State of Maryland, and for the Structural Engineers Certification Board (SECB) of the National Council of Structural Engineers Associations (NCSEA).