2018 IBC Cold-Formed Steel Framing Design Changes
by Jeff Ellis, P.E., S.E., SECB
July 8, 2021; 11:00 AM - 1:00 PM Pacific TimeSmall Business System Requirements FAQ Register
ICC Preferred Provider Course Number: 24013
2018 IBC cold-formed steel design changes include a reorganization of the AISI specification and consolidation of most of the AISI framing standards into two standards. These changes are to improve understanding, use, and development as well as for better harmony between the AISI and AISC provisions. Additionally, there are some significant technical changes for the design of cold-formed steel. This presentation will discuss the reorganization and technical changes so the attendee’s may update their CFS design and detailing practices accordingly.
Jeff Ellis, P.E., S.E., SECB, is the Director of Codes & Compliance for Simpson Strong-Tie Company Inc., where he’s worked since 2000. He was a practicing design engineer for commercial, residential and forensic projects for more than 9 years prior to joining Simpson Strong-Tie. He currently serves as a manager on the International Code Council Evaluation Service (ICC-ES) Board of Managers and served as Structural Engineers Association of Southern California (SEAOSC) president, SEAOC secretary, California Building Officials (CALBO) Structural Safety Committee member, chairman of the AISI Committee on Framing Standards (COFS) Lateral Design Subcommittee, and president of the Cold-Formed Steel Engineers Institute (CFSEI).
|1 Connection||2 Connections||3 Connections||4 Connections||5 Connections||> 5 Connections|
|* Registration on or before July 6, 2021|
Please note a single registration allows you to have one connection. However, a number of people can view and listen to the seminar using one connection by using an LCD projector (or a large computer monitor) and good computer speakers or a speaker phone.
All attendees, irrespective of the number of registered connections, can earn 0.15 Continuing Education Units (CEUs) or 1.5 professional development hours (PDHs). CEU/PDH certificates are provided free of charge.
- A connection is defined as a single web connection plus a single telephone connection (if necessary). If you want to sign up for more than one connection for this seminar, you will have the opportunity to do so after placing the seminar in your cart.
- A $15 fee will apply if the seminar registrant wishes to revise the web seminar registration (e.g. switch from one web seminar to another).
- Refunds are limited to 80 percent of fee and must be applied for in writing WITHIN THIRTY DAYS after the scheduled seminar.
- We are a registered provider for continuing education in the State of Florida (Provider # 4732), the State of New York (Provider # 99), the State of New Jersey (Provider # 24GP00014200), the State of Maryland, and for the Structural Engineers Certification Board (SECB) of the National Council of Structural Engineers Associations (NCSEA).